Epiphone Casino Change Pickups



Epiphone Casino Change Pickups

ECOGRA is an international testing agency that accredits and regulates the world of online gambling. It Best Replacement Pickups For Epiphone Casino checks to see whether online casinos are honest, fair and safe. ECOGRA is the word on responsible gambling and protects players against unfair practices.

  1. Take measurements of the pickup height from each string so you can reset it. If the new pickups are different resistances from the current ones you will need to adjust the height to get an even, balanced output between the two pickups. My old tech used to charge $35 for pickup installation and it was an extra $35 on top for having to do a.
  2. I now have a Epiphone Casino gold top with a Lollar 50's wind P-90 in the neck and a Wolfetone Meaner P-90 in the bridge. It should be noted that I also ordered the shim pack that Jason Lollar sells and they look great and fit perfectly.

Epiphone Casino Change Pickups Les Paul

Upgrading the stock Casino pickups for a more vintage sound

Epiphone Casino Change Pickups Tab

Creamery - Upgrading Stock Epiphone Casino Pickups

Epiphone Casino Change PickupsEpiphone casino change pickups for sale by owner

Change Pickups On Epiphone Casino

Epiphone Casino Change Pickups

I recently ran one of my regular competitions to wind a set of handwound pickups and the winner, Mike, asked whether he could have his Epiphone Casino pickups rewound/upgraded for a more vintage tone - 'No problem', I said. The stock pickups had a very high output, 12.1k in the Bridge & 11.6k in the Neck, an unsubtle set especially for a Hollow Body guitar.

Mike wanted to tone them down with a rewind and new magnets.

Upgrading Stock Epiphone Casino Pickups - What's inside

Change

The first task was to remove the covers and see what's inside. The Epiphone Casino has custom bobbins with a string spacing narrower than a standard P90. The option was to either make new bobbins to match the cover pole spacing or simply use the existing ones. Mike had no issue with me utilising the existing bobbins so the challenge now was to remove the existing overwound coil wire in such a way as to not nick the sides. Any cuts or scratches to the very thin top & bottom layers of the bobbins could catch on the new coil wire when winding, snapping or pulling it leaving a few thousand turns of coil useless.